دليل تركيب وصيانة مصابيح إنارة الشوارع بالطاقة الشمسية

Installation and Maintenance Guide for Solar Street Lights: Practical Strategies to Ensure Long-term Stable Operation

Comprehensive Guide to the Installation and Maintenance of Solar Street Lights

With the global push for environmental conservation and sustainable development, solar street lights have emerged as a preferred solution for urban and rural road lighting. They not only harness clean, renewable energy but also offer long-term economic benefits. To maximize their efficiency and durability, proper installation and maintenance are essential. This article provides a detailed guide to installing and maintaining solar street lights, backed by best practices and case examples.

Installation Guide: Precision for Optimal Performance

1. Site Selection and Layout

The efficiency of solar street lights largely depends on the chosen site. The installation site should have adequate sunlight exposure throughout the day, with minimal obstructions like buildings or trees. This ensures the solar panels can generate optimal power.

Factors to consider include:

Sunshine Hours: For instance, La Réunion, France, receives 2,200–2,500 annual sunshine hours, making it ideal for solar installations.
Road Features: Evaluate road width, traffic flow, and environmental shading to ensure even light distribution. On a 10-meter-wide, two-lane road, install 2–3 solar street lights per side, spaced 20–30 meters apart.

2. Component Configuration

Key components include solar panels, batteries, controllers, and LED lamps. Their configuration should match the energy needs.

For example:

A 120W solar street light generates up to 960Wh daily under optimal conditions, supporting 12 hours of nighttime operation.
Batteries, often lithium or LiFePO4, should have enough capacity for lighting and backup. For instance, a 1920Wh LiFePO4 battery paired with a 150W panel ensures reliable lighting, even during cloudy weather.

3. Foundation and Pole Design

A stable foundation is crucial for pole stability and longevity. Guidelines include:

Depth: Foundations should be at least 1.5 meters deep and reinforced with concrete.
Height: Poles should range from 6 to 12 meters, depending on road requirements.

4. Electrical System Setup

The electrical system, centered around the controller, must meet energy-saving and safety standards. Controllers should include:

Overcharging and over-discharging protection.
Light control for efficient operation.
Intelligent charge/discharge management for weather adaptation.

Maintenance Tips: Ensuring Longevity and Performance

1. عمليات التفتيش المنتظمة

Quarterly checks should cover:

Solar panels: Clean with soft cloths and water to remove dirt and improve efficiency.
البطاريات: Monitor charge/discharge cycles and voltage levels.
Controllers: Verify settings and connectivity for stable performance.

2. Cleaning and Upkeep

Solar panels accumulate dust and dirt, reducing efficiency. Cleaning frequency should reflect local conditions. For example, in dust-prone regions like Beijing, panels may require more frequent cleaning.

3. System Optimization

Upgrading components like LED fixtures can enhance efficiency. In one case, improving LED efficiency from 100 lumens/watt to 240 lumens/watt reduced energy use by 80%.

4. Troubleshooting Common Issues

Dim Lighting: Check panel angles, battery charge, and LED health.
Short Lighting Duration: Inspect battery capacity and controller settings.
Controller Malfunction: Test connections and replace faulty controllers promptly.
Aging Batteries: Replace when energy storage diminishes.

5. Safety and Lightning Protection

Install lightning rods or grounding wires in high-risk areas.
Always wear protective gear during maintenance to prevent accidents.

الخاتمة

The systematic installation and maintenance of solar street lights ensure reliable and long-lasting performance. By adhering to best practices, these systems can provide sustainable, cost-effective lighting for urban and rural areas while promoting green energy adoption. Proper care and timely upgrades further extend their life span, making them a valuable asset in the global push for sustainability.

النشرة الإخبارية

احصل على الأخبار على بريدك الإلكتروني

هل تحتاج إلى مساعدة؟ اتصل بنا 24/7

sales@xylightingled.com

xylightingled هي شركة توريد بالجملة في الصين لديها أكثر من 10 سنوات من الخبرة في توفير إضاءة LED الشمسية عالية الجودة وإضاءة LED وأنظمة تخزين البطاريات وخزانات تخزين الطاقة. نحن حريصون على بناء علاقة مفيدة للطرفين معك.

التصنيفات

الفئات الفرعية

روابط مفيدة

الفئات الفرعية

تواصل معنا

+86-158 1737 3143

sales@xylightingled.com

3F، المبنى A2، رقم 2533، طريق غوانغوانغ في مجتمع فنغهوانغ، شارع فنغهوانغ، منطقة غوانغمينغ,

شينزين الصين 518109

العربية